3C8558 STOP SAFETY Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8558
3C-8558
3C8558
CA3C8558
3C-8558
3C8558
Weight: 0.57 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure (Input Sensor)
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01196651
Remove nuts (1) and bolts (2). Disconnect harness assemblies (3). Lift cover assembly (4) in order to access the second harness assembly (3). Remove cover assembly (4) and the gasket.
Illustration 2 g01196656
Remove speed sensor (5). Removal Procedure (Output Sensor)
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g01196682
Disconnect harness assembly (1). Remove bolt (3) and speed sensor (2).
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01196651
Remove nuts (1) and bolts (2). Disconnect harness assemblies (3). Lift cover assembly (4) in order to access the second harness assembly (3). Remove cover assembly (4) and the gasket.
Illustration 2 g01196656
Remove speed sensor (5). Removal Procedure (Output Sensor)
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g01196682
Disconnect harness assembly (1). Remove bolt (3) and speed sensor (2).