STOP AS 5305240 - Caterpillar

Active Diagnostic Codes
Active faults can be quickly found by reviewing the "Active Diagnostics" page in the Plus+1 Service Tool for Caterpillar. Refer to Troubleshooting, "Diagnostic Code List". Also refer to Troubleshooting, "Using the Electronic Service Tool to Determine Diagnostic Codes" or Troubleshooting, "Using the Operator Monitor to Determine Diagnostic Codes".
Illustration 1 g03400196
Typical "Active Diagnostics" shown in the "Service Tool" screen
Data Recording with Plus+1 Service Tool for Caterpillar
Illustration 2 g03400199
Data Logging screen
Establish communications with the machine controllers using Plus+1 Service Tool for Caterpillar. A recorded log can be saved and viewed for future reference by selecting the red recorder button (1). In the following examples, "Propel" (2) has been selected.
Illustration 3 g03400204Type in the name for the log file being created, for example "PROPEL DURING FAULT", then select "Save".The default location for the log files is – "C:\Documents\Sauer-Danfoss\PLUS1\GUIDE Service Tool\Log".
Illustration 4 g03400206For this example, the "Propel Sensors" (3) are selected.
Illustration 5 g03400210In the above screen, the machine was propelled while the data is being recorded. The data being viewed with the service tool is being recorded. The recording will stop once any changes/selections are made in the service tool. However, "Run" and "Hold" buttons (4) can be selected in order to record at the desired times.An optional real-time graphing icon (5) can be selected for a graphical display of values.
Illustration 6 g03400213Select the folder icon (6) in order to view the saved log file. From the pop-up window, browse to the saved log file then select and open the file.
Illustration 7 g03400261Select the play button (7) in order to play back the logged data recorded. The 'Step' button (8) can be selected during playback to pause and resume playback. The 'Export' button (9) is used to export the log file to a folder of your choice. Select the 'Back' button (10) to return back to the service tool menu screen.
Illustration 8 g03400264
Typical screen from playback of propel values