STORAGE GP-VANDALISM GUARD 1104840 - Caterpillar

Removal Procedure
Start By:
Release hydraulic system pressure.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling prodecure.
Illustration 1 g02799166
Open door assembly (1) .
Illustration 2 g03378426
Disconnect strap (2) . Remove bolts (2a) . Use two people to remove grill assembly (3) . The weight of grill assembly (3) is approximately 23 kg (50 lb).
Illustration 3 g02799187
Disconnect hose assemblies (4) and hose (5) .
Illustration 4 g02799195
Disconnect hose assembly (6) . If equipped, disconnect hose (7) .
Illustration 5 g02799213
If equipped, disconnect hose (8) . Remove clip (9) .
Illustration 6 g02799236
Disconnect tube assembly (10) .
Illustration 7 g02799237
Disconnect hoses (11) .
Illustration 8 g02799256
Disconnect hose assembly (12) .
Illustration 9 g02799268
Illustration 10 g02799296
Remove bolt (13) and nuts (14) . Repeat this step for the opposite side.
Illustration 11 g02799300
Use a suitable lifting device to remove radiator and hydraulic oil cooler (15) . The weight of radiator and hydraulic oil cooler (15) is approximately 30 kg (65 lb).Installation Procedure
Install radiator and hydraulic oil cooler (15) in the reverse order of removal.
Tighten bolts (13) to a torque of 55 N m (41 lb ft).