1603448 STRAINER AS Caterpillar parts
525B, 525C, 535B, 535C, 545, 545C, 938G, 938G II, IT38G, IT38G II
Rating:
Alternative (cross code) number:
CA1603448
160-3448
1603448
CA1603448
160-3448
1603448
INTEGRATED TOOLCARRIER, WHEEL SKIDDER,
Compatible equipment models: 1603448:
Number on catalog scheme:
55
For full view, you need register
Information:
Remove Valves
start by:a) remove cylinder headb) remove precombustion chambers 1. Put compression on valve spring (2) with tool (A) and remove locks (1).2. Remove tool (A), rotocoil, spring and valve. Put identification on valves with respect to their locations in the cylinder head. 3. Check the spring force with tool (B). The spring force is 57.7 2.9 lb. (26.2 1.3 kg). The length of spring under test force is 1.766 in. (44.86 mm). The free length after test is 2.05 in. (52.0 mm).4. Do Steps 1 through 3 again for remainder of valves.Install Valves
1. Put clean engine oil on valve stems. Install valve, spring and rotocoil in the cylinder head. 2. Put tool (A) in position on valve spring and install the locks (1).
Locks can be thrown from valve when compressor is released, if they are not in their correct position on valve stem.
3. Remove tool (A) and hit the top of valve with a plastic hammer to be sure the locks are in their correct position on valve.4. Do Steps 1 through 3 again for remainder of valves.end by:a) install precombustion chambersb) install cylinder head
start by:a) remove cylinder headb) remove precombustion chambers 1. Put compression on valve spring (2) with tool (A) and remove locks (1).2. Remove tool (A), rotocoil, spring and valve. Put identification on valves with respect to their locations in the cylinder head. 3. Check the spring force with tool (B). The spring force is 57.7 2.9 lb. (26.2 1.3 kg). The length of spring under test force is 1.766 in. (44.86 mm). The free length after test is 2.05 in. (52.0 mm).4. Do Steps 1 through 3 again for remainder of valves.Install Valves
1. Put clean engine oil on valve stems. Install valve, spring and rotocoil in the cylinder head. 2. Put tool (A) in position on valve spring and install the locks (1).
Locks can be thrown from valve when compressor is released, if they are not in their correct position on valve stem.
3. Remove tool (A) and hit the top of valve with a plastic hammer to be sure the locks are in their correct position on valve.4. Do Steps 1 through 3 again for remainder of valves.end by:a) install precombustion chambersb) install cylinder head
Caterpillar parts catalog:
Parts strainer Caterpillar catalog:
938G, 938G II, IT38G, IT38G II
1603454
STRAINER AS
938G, 938G II, IT38G, IT38G II
938G, 938G II, IT38G, IT38G II
2005978
STRAINER
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, 980H, IT62G, IT62G II
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, 980H, IT62G, IT62G II
2068818
STRAINER
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K, 924G, 924GZ, 924H, 924HZ, 9...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K, 924G, 924GZ, 924H, 924HZ, 9...
1282435
STRAINER AS
914G, IT14G, IT14G2
914G, IT14G, IT14G2
1756473
STRAINER AS
914G, IT14G, IT14G2
914G, IT14G, IT14G2
1655881
STRAINER AS
910G
910G
1652218
STRAINER AS
910G
910G
1409211
STRAINER AS
924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT28G
924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, IT28G
902, 906, 908
1416255
STRAINER
902, 906, 908
902, 906, 908
3062754
STRAINER AS
938G, 938G II, IT38G, IT38G II
938G, 938G II, IT38G, IT38G II