parts catalog

STRAINER 2690274 - Caterpillar

2690274 STRAINER Caterpillar parts STRAINER
Alternative (cross code) number:
Caterpillar 2690274 STRAINER
Weight: 0.23 pounds 0 kg.

Buy STRAINER 2690274 Caterpillar genuine, new aftermarket tractor parts with delivery

You can buy parts: .


16 Mar 2020
0.06[0.00] Pounds
The ROP Shop New Genuine Simplicity Foam Poly Gasket fits Conquest 2690264 Broadmoor 2690274
  For full view, you need register


Disassembly Procedure
Start By:
Remove the control manifold (pilot oil). Refer to Disassembly and Assembly, "Control Manifold (Pilot Oil) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g01211570
Remove bolts (1) and valve assembly (2).
Illustration 2 g01211571
Remove O-ring seals (3).
Repeat Steps 1 and 2 for the remaining valve assemblies.
Illustration 3 g01211572
Illustration 4 g01211575
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plugs (4) and (5).
Remove spool (6).
Remove spring (8) and spool (7).
Remove O-ring seals (9) from plugs (4) and (5).
Illustration 5 g01211576
Remove spring (10).

Parts strainer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.