AVSPARE.COM
parts catalog

STRAINER 2809526 - Caterpillar



2809526 STRAINER Caterpillar parts STRAINER
Rating:
86
Alternative (cross code) number:
CA2809526
280-9526
2809526
Caterpillar 2809526 STRAINER

Buy STRAINER 2809526 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


During discharge procedure, use protection over the eyes or personal injury can result.
1 Put support assembly (1) in horizontal position in a bench vise and tighten the vise.2 Put several shop towels or rags (four minimum) over the end of the cylinder in the vise as shown.3 Measure 38.10 mm (1.50") in from the fixed end of the cylinder; use a center punch and a hammer to drive the punch through the towels and into the cylinder until the gas just begins to leak off.4 Hold the towel and punch in place until all the gas has been released. Then, slowly remove the punch. The released oil will be absorbed by the towel.5 With the towel over the hole, push shaft (2) completely into the cylinder to remove any remaining oil.6 Remove the assembly from the vise and discard (throw away).


Parts strainer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.