3680025 STRAINER GP Caterpillar parts
PF-300C, PS-300B
Rating:
Alternative (cross code) number:
CA3680025
368-0025
3680025
CA3680025
368-0025
3680025
Weight: 0.23 pounds 0 kg.
PNEUMATIC COMPACTOR,
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the implement hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Illustration 1 g00535581
Remove six bolts (1) and remove cover (2).
Illustration 2 g00535586
Remove four bolts (3) and remove cover (4). Remove two hose assemblies (5).
Illustration 3 g00536194
Remove bolt (6) and remove pin assembly (7). If shims are present, put identification marks on all shims for assembly purposes and remove the shims.
Illustration 4 g00535621
Attach a suitable lifting device to the rod end of boom swing cylinder (13). Place a 19 mm (0.75 inch) board (12) underneath boom swing cylinder (13). The weight of boom swing cylinder (13) is approximately 75 kg (165 lb).
Illustration 5 g00535594
Disconnect hose assembly (8). Remove two bolts (9) and strap (10). Remove pin assembly (11). Raise the rod end of boom swing cylinder (13) in order to ease the removal of pin (11). Carefully remove boom swing cylinder (13).
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the implement hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Illustration 1 g00535581
Remove six bolts (1) and remove cover (2).
Illustration 2 g00535586
Remove four bolts (3) and remove cover (4). Remove two hose assemblies (5).
Illustration 3 g00536194
Remove bolt (6) and remove pin assembly (7). If shims are present, put identification marks on all shims for assembly purposes and remove the shims.
Illustration 4 g00535621
Attach a suitable lifting device to the rod end of boom swing cylinder (13). Place a 19 mm (0.75 inch) board (12) underneath boom swing cylinder (13). The weight of boom swing cylinder (13) is approximately 75 kg (165 lb).
Illustration 5 g00535594
Disconnect hose assembly (8). Remove two bolts (9) and strap (10). Remove pin assembly (11). Raise the rod end of boom swing cylinder (13) in order to ease the removal of pin (11). Carefully remove boom swing cylinder (13).
Caterpillar parts catalog:
Parts strainer Caterpillar catalog:
1726256
STRAINER
CB-214D
CB-214D
1787941
STRAINER
CB-14, CB-214D, CB-214E, CB-22, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
CB-14, CB-214D, CB-214E, CB-22, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
1683500
STRAINER
CB-335D
CB-335D
1401756
STRAINER
PF-290B
PF-290B
1401762
STRAINER
PF-290B
PF-290B
1733701
STRAINER
RM-250C, RM-300, RM-350B, RM-500, RR-250B
RM-250C, RM-300, RM-350B, RM-500, RR-250B
AP-1055D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, PM-201
4525438
STRAINER GP
RM-500
RM-500
2693755
STRAINER
CB-14, CB-214E, CB-334D, CB-334E, CB-335D, CB-34
CB-14, CB-214E, CB-334D, CB-334E, CB-335D, CB-34
2190349
STRAINER
CB-434D, CB-44B, CB-534D, CB-54, CB-54B, CB-564D, CB-64, CD-54, CD-54B, CW-34
CB-434D, CB-44B, CB-534D, CB-54, CB-54B, CB-564D, CB-64, CD-54, CD-54B, CW-34
CB-434D, CB-44B, CB-534D, CB-54, CB-54B, CB-564D, CB-64, CD-54, CD-54B
2572022
STRAINER-SUCTION
CB-534D, CB-54, CB-564D, CB-64
CB-534D, CB-54, CB-564D, CB-64