STRAINER- 4C9047 - Caterpillar

Illustration 1. Dimensions for eight fabricated plates (A).2. Fabricate five reinforcing plates (B) from 3 mm (.12") mild steel as shown in Illustration 2.
Illustration 2. Dimensions for five fabricated plates (B).3. Fabricate one reinforcing angle (C) from 40 mm by 40 mm by 3 mm thick (1.57" by 1.57" by .12" thick) angle iron as shown in Illustration 3.
Illustration 3. Dimensions for fabricated angle (C).4. Use E7018 Electrode or an equivalent to weld fabricated plates (A and B) and fabricated angle (C) in position in the upper housing frame as shown in Illustrations 4 and 5.
Illustration 4. Location of reinforcing plates (A and B) and angle (C) on the upper house frame.
Illustration 5. Locations and dimensions for welds.