STRAINER 5I4510 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00625429
Remove nuts (1) and allen head screw (3) .
Remove cover (2) .
Illustration 2 g00625434
Remove the nut from clamp (5) .
Remove two nuts (6). Remove bar (4) .
Remove the bolts that fasten electronic control module (7) to the cylinder block. Remove electronic control module (7) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00625434
Install electronic control module (7) on the cylinder block.
Position bar (4) and install nuts (6) .
Install clamp (5) in position.
Illustration 4 g00625429
Position cover (2) and install nuts (1). Tighten allen head screw (3) to a torque of 6 1 N m (53 9 lb in).