STRAP AS 2W5555 - Caterpillar

Illustration 4 g01311597
Connect hose assemblies (28) and (27) .
Illustration 5 g01311567
Illustration 6 g01311504
Install clip (26). Connect hoses (25) and (24) .
Illustration 7 g01311500
Connect hoses (23) and (22) .
Illustration 8 g01311473
Connect harness assemblies (21) and (20) .
Illustration 9 g01311472
Connect strap assembly (19) .
Illustration 10 g01311470
Position bracket assembly (17) and install bolts (18) .
Illustration 11 g01311281
Install guard (16) and bolts (15) .
Illustration 12 g01311204
Position the refrigerant compressor and bolts (13). Install hose (12) and tube (11). Install bolts (14) .
Illustration 13 g01311198
Connect harness assembly (10) and tighten screw (9) to a torque of ().
Illustration 14 g01311186
Connect cable assemblies (8) .
Illustration 15 g01311183
Connect hose assemblies (7) and (5). Turn valve (6) to the on position.
Illustration 16 g01311178
Attach a suitable lifting device to pump (3). The weight of pump (3) is approximately 160 kg (350 lb). Install pump (3) and bolts (4) .
Illustration 17 g01311175
Connect hose (2) .
Illustration 18 g01311099
Connect hose (1) .
Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".End By:
Install the coolant tank (expansion). Refer to Disassembly and Assembly, "Coolant Tank (Expansion) - Remove and Install".
Install the fan. Refer to Disassembly and Assembly, " Fan - Remove and Install".
Install the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Install".
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".