STRAP-CABLE 3524202 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Tool Description     Qty    
A     4C-6486     Stand     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g03454662
Position Lift arms (1) onto Tooling (A) .
Release the hydraulic system pressure. Refer to Operation and Maintenance Manual, "Hydraulic System Pressure - Release"
Drain the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic Oil - Change"
Illustration 2 g03455162
Remove front cover (2) .
Illustration 3 g03455181
Disconnect hose assemblies (3) and (4). Disconnect hose assemblies (5) and (6) .
Illustration 4 g03455326
Disconnect hose assemblies (7) and (8). Disconnect hose assemblies (9) and (10) .
Illustration 5 g03455676
Remove bolts (12) Remove cover (11) .
Illustration 6 g03455692
Remove cotter pins (13). Remove pins (14) .
Illustration 7 g03455757
Disconnect cable assemblies (15) .
Illustration 8 g03455780
Remove bolts (16) .
Illustration 9 g03455797
Remove bolts (18). Remove bank valve (17) .