4426178 STRAP Caterpillar parts
SE60 V XW
Rating:
Alternative (cross code) number:
CA4426178
442-6178
4426178
CA4426178
442-6178
4426178
Weight: 0.03 pounds 0 kg.
ASPHALT SCREED,
Compatible equipment models: 4426178:
Information:
Machines Using F37, RAYFLEX®
, And Cellulose Material On Friction DiscsReference: Guideline For Reusable Parts, SEBF8031-02; "Transmission Clutch Plates And Disc Assemblies With F37 Clutch Friction Material". Guideline For Reusable Parts And Salvage Operations, SEBF8098-01; "Transmission Clutch Plates And Disc Assemblies With RAYFLEX® Clutch Friction Material".
Guideline For Reusable Parts And Salvage Operations, SEBF8115; "Transmission Clutch Plates And Disc Assemblies With Cellulose (Paper) Clutch Friction Material".
Adherence to guidelines for cleaning friction discs using F37, RAYFLEX®, and Cellulose friction material is essential to ensure acceptable service life for the discs. When cleaning discs, refer to the referenced literature and follow the guidelines listed below.
Chlorinated solvents, diesel fuel, kerosene and petroleum distillates, such as Stoddard Solvent or naptha, can be used to clean the listed friction materials. However, these materials are porous and incorrect cleaning materials or processes can damage them and lead to premature failure.
Follow these precautions:
* Do not use petroleum solvents hotter than 38° C (100° F).* Minimize the time that solvent contacts the disc.* Use towels or dry compressed air to dry the discs after washing.* Do not stack the discs after cleaning.Do not use any of the following types of cleaning materials or permit them to come into contact with the listed friction material. These cleaners will weaken the base material and cause it to disintegrate in operation.
* Water or steam.* Water based cleaning solutions (including Caterpillar Hydrosolv 4165 and Hydrosolv 100).* Freon.* Paint thinner.* Keytones, aldehydes (such as MEK and acetone).Caterpillar Brazil Ltd. (CBL) recommends hanging the discs vertically in the same order that they were removed in for extended storage. CBL also recommends protecting the stored discs with a plastic sheet in order to prevent moisture absorption and dust accumulation. Use the referenced guidelines when inspecting surfaces of plates and pistons that the disc will come into contact with. Plates and pistons with oxide deposits or resulting surface imperfections can cause damage to friction discs.
, And Cellulose Material On Friction DiscsReference: Guideline For Reusable Parts, SEBF8031-02; "Transmission Clutch Plates And Disc Assemblies With F37 Clutch Friction Material". Guideline For Reusable Parts And Salvage Operations, SEBF8098-01; "Transmission Clutch Plates And Disc Assemblies With RAYFLEX® Clutch Friction Material".
Guideline For Reusable Parts And Salvage Operations, SEBF8115; "Transmission Clutch Plates And Disc Assemblies With Cellulose (Paper) Clutch Friction Material".
Adherence to guidelines for cleaning friction discs using F37, RAYFLEX®, and Cellulose friction material is essential to ensure acceptable service life for the discs. When cleaning discs, refer to the referenced literature and follow the guidelines listed below.
Chlorinated solvents, diesel fuel, kerosene and petroleum distillates, such as Stoddard Solvent or naptha, can be used to clean the listed friction materials. However, these materials are porous and incorrect cleaning materials or processes can damage them and lead to premature failure.
Follow these precautions:
* Do not use petroleum solvents hotter than 38° C (100° F).* Minimize the time that solvent contacts the disc.* Use towels or dry compressed air to dry the discs after washing.* Do not stack the discs after cleaning.Do not use any of the following types of cleaning materials or permit them to come into contact with the listed friction material. These cleaners will weaken the base material and cause it to disintegrate in operation.
* Water or steam.* Water based cleaning solutions (including Caterpillar Hydrosolv 4165 and Hydrosolv 100).* Freon.* Paint thinner.* Keytones, aldehydes (such as MEK and acetone).Caterpillar Brazil Ltd. (CBL) recommends hanging the discs vertically in the same order that they were removed in for extended storage. CBL also recommends protecting the stored discs with a plastic sheet in order to prevent moisture absorption and dust accumulation. Use the referenced guidelines when inspecting surfaces of plates and pistons that the disc will come into contact with. Plates and pistons with oxide deposits or resulting surface imperfections can cause damage to friction discs.
Caterpillar parts catalog:
Parts strap Caterpillar catalog:
3999015
STRAP AS
SE60 V XW
SE60 V XW
3644569
STRAP
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 584, 586C, AS4173, SE60 V XW
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 584, 586C, AS4173, SE60 V XW
4255918
STRAP
SE60 V XW
SE60 V XW
1497143
STRAP
RM-350B
RM-350B
0814285
STRAP
CB-214B, CB-521, CB-525B, PS-300, PS-500
CB-214B, CB-521, CB-525B, PS-300, PS-500
3877864
STRAP-CLAMP
CB-54B, CW-34
CB-54B, CW-34
1103107
STRAP AS
5230, 5230B
5230, 5230B
0951804
STRAP-CABLE
375, 5080, CB-614, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E450, E650, E70, E70B, EL200B, EL240B
375, 5080, CB-614, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E450, E650, E70, E70B, EL200B, EL240B
6I7478
STRAP AS-REAR
5130, 5130B
5130, 5130B
4183840
STRAP-GROUNDING
CB-54B
CB-54B
3644568
STRAP
2470C, 2570C, 2670C, 553C, 563C, 573C, 584, SE60 V XW
2470C, 2570C, 2670C, 553C, 563C, 573C, 584, SE60 V XW
4476986
STRAP AS
SE60 V XW
SE60 V XW