STRAP-CABLE 4458744 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
B LOCTITE 271 1
Illustration 1 g02733299
Disconnect hose assemblies (4). Remove elbow (1) and the O-ring seal.
Use Tooling (A) to remove engine oil filters (3).
Remove the engine oil filter base (2).
Illustration 2 g02733317
Remove studs (5). Installation Procedure
Install the engine oil filter base (2) in the reverse order.
Apply Tooling (B) to the threads of studs (5). Tighten to 80 14 N m (59 10 lb ft).
Apply clean engine oil to the oil filter seals prior to installation. Install the engine oil filters until the oil filter seal contacts the base, then turn the engine oil filters one full turn.
Apply clean engine oil to the bore for elbow (1).