STRIKER ASSY. 1R6152 - Caterpillar

Alert Indicators
Action Lamp (4) - This indicator flashes to indicate a Warning Category 2 or a Warning Category 3 has been registered by the Caterpillar Monitoring System. For more information refer to Operation and Maintenance Manual, "Caterpillar Monitoring System". Indicators
Left Turn (1) - This indicator will be on when the external lights are signaling a left turn.
Right Turn (2) - This indicator will be on when the external lights are signaling a right turn.
Body Up (3) - This indicator will be on when the dump body is not down. When the indicator is on, the transmission will be limited to a programmed gear limit. This indicator will also be on if the body position sensor is out of calibration. Move the machine to a convenient place to park the machine and stop the engine. Find the cause immediately.This indicator will be on for 3 seconds during powerup in order to permit the operator to know that the indicator is functioning properly. The operator must inspect this indicator during powerup. If the indicator does not come on, or glows dimly during powerup, or if the indicator remains on and the body is down, find the cause immediately.
Tailgate Down (3) - This indicator will be on when the tailgate is not up. When the indicator is on, the transmission will be limited to a programmed gear limit. This indicator will be on for 3 seconds during powerup in order to permit the operator to know that the indicator is functioning properly. The operator must inspect this indicator during powerup. If the indicator does not come on, or glows dimly during powerup, or if the indicator remains on and the tailgate is down, find the cause immediately.
Transmission Reverse (5) - This indicator will be on when the transmission control is in the REVERSE position, and the machine is in reverse gear. This indicator will be on when the machine will be shifting into reverse gear when forward ground speed drops.
Residual Brake Oil Pressure (6) - This indicator will be on when there is oil pressure in the wheel brakes. The lamp will illuminate when the service brakes are applied. The lamp should go out when the brakes are released. If this indicator stays on, the brakes are holding residual brake oil pressure. Stop the machine and investigate the cause.
High Beam (7) - This indicator will be on when the headlights are set on high beam.
Retarder (8) - This indicator will be on when the Automatic Retarder Control (ARC) is on. The indicator will also be on when you use the manual retarder. When the ARC is on, this indicator will be on for 3 seconds during powerup in order to permit the operator to know that the indicator is functioning. The operator must inspect this indicator during powerup. If the indicator does not come on or glows dimly during powerup, or if the indicator remains on, find the cause immediately.This indicator will also be on and flashes when there is a