STRIP-TERMINAL 1180246 - Caterpillar

Personal injury or death can result from the blade falling.Block the blade before changing blade tips.
Illustration 1 g01071858
End bits (1) and/or cutting edges (2) may be damaged. The end bits and/or the cutting edges may be worn excessively. Replace the end bits and/or the cutting edges, as needed.
Place blocks under the blade. Lower the blade onto the blocks. Do not block up the blade too high. Just use enough blocks so that the end bits and the cutting edges can be removed.
Remove the end bits and/or the cutting edges.
Install new end bits and/or new cutting edges.
Raise the blade and remove the blocks.