STRIP 1273927 - Caterpillar

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety Section
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
360-6218 Electronic Control Wiring Gp (- 02)
Item Qty Part No. Part Name
(1) 2 111-4836 Clip
(2) 2 116-0118 Clip
(3) 1 369-0024 Wiring Harness
(4) 1 432-6274 Platform Harness As
(5) 1 163-6795 Cable Strap
(6) 10 3S-2093 Cable Strap
(7) 1 7X-2621 Bolt
(8) 3 8T-4121 Hard Washer
(9) 2 8T-4137 Bolt
Illustration 2 g06026264
Overview of the 360-6218 Electronic Control Wiring Gp
Installation Procedure
Illustration 3 g06026270
View from under the cab showing left-hand electric pedal connection.
(GE-C2) Connect to Electric Pedal - Left-Hand "J850 WH", "235 BK", "N794 GY"
(GE-C3) When using Electric Pedal - Right-Hand connection"J850 WH", "235 BK", "N795 WH"
(1) 111-4836 Clip
(4) 432-6274 Platform Harness As
(8) 8T-4121 Hard Washer
(9) 8T-4137 Bolt
Install wiring and connectors as shown.Note: Wiring can be installed to use an electric pedal on either the right-hand side or the left-hand side.
Illustration 4 g06026298
(GE-C1) Connect to Harness (12 Poles), "J850 WH", "235 BK", "N794 GY", "J850 WH", "235 BK", "N795 WH"
(1) 111-4836 Clip
(4) 432-6274 Platform Harness As
(6) 3S-2093 Cable Strap
(8) 8T-4121 Hard Washer
(9) 8T-4137 Bolt
Route harness (4) and connect on the right-hand side under the cab as shown.
Illustration 5 g06026336
View from left-hand side of the cab with panels removed to show harness routing.
(GA-C3) Connect to Harness (12 Poles), "J850 WH", "235 BK", "N794 GY", "J850 WH", "235 BK", "N795 WH"
(GA-C1) Connect to Harness (6 Poles), "J850 WH", "235 BK", "N794 GY", "N795 WH"
(3) 369-0024 Wiring Harness
(5) 163-6795 Cable Strap
(6) 3S-2093 Cable Strap
Connect and route harness (3) as shown.