STRIP-LOCKING 2837554 - Caterpillar

Lower equipment with slight down pressure before servicing machine. Read and understand warning and caution information provided on the machine. Follow servicing instructions carefully. Engage parking brake, block tires and attach warning tags to controls while servicing machine.Always inspect cooling system with engine stopped.Remove filler cap slowly to relieve pressure. Steam can cause personal injury.Do not allow corrosion inhibitor, which contains alkali, to contact skin or eyes.Do not smoke while refueling. Fumes from fuel are flammable.Batteries give off flammable fumes that can explode. Do not smoke when observing electrolyte level.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.When using pressure air wear protective face shield and protective clothing. Maximum air pressure must be below 30 psi (205 kPa) for cleaning purposes.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.To avoid possible weakening of the ROPS (Rollover Protective Structure), consult a Caterpillar dealer before altering the ROPS in any way. The protection offered by the ROPS will be impaired if it has been subjected to structural damage or has been involved in an overturn incident.Personal injury can result if machine is articulated when someone is in the pivot area. Connect frames with safety link, shut off engine and relieve hydraulic pressure before working in pivot area.Do not attempt adjustments while machine is moving or the engine is running.Do not allow unauthorized personnel on machine while it is being serviced.Wear hard hat, safety glasses and safety shoes as the job requires.Use the proper tools. Repair or replace broken or damaged equipment.Operate engine only in well ventilated area.Store oily rags and other combustible material in a safe place.Do not smoke while refueling.Use a self-attaching air chuck and stand behind tread when inflating tires.Hydraulic oil is flammable. Do not weld on pipes or tubes that are filled with oil.To prevent personal injury, always lower all equipment with slight down pressure, stop engine, set parking brake and block or restrain machine before servicing it, unless otherwise specified.If engine is not running, do not release emergency or parking brake systems unless machine is blocked or restrained. Machine could move and cause injury to personnel. Connect frames with safety link before servicing machine center area. Turn disconnect switch OFF and remove key before servicing electrical system. Use caution when removing radiator cap, drain plugs, grease fittings or pressure taps.