STRIP 3042549 - Caterpillar

1. Use a magnet (1) to remove valve lifters (2).2. Check the diameter of the valve lifter. The diameter of the valve lifter (new) must be 33.287 0.013 mm (1.3105 .0005 in.). The bore in the block for new valve lifters must be 33.388 0.025 mm (1.3145 .0010 in.). The maximum permissible clearance between the lifter and the bore for the valve lifter (worn) is 0.30 mm (.012 in.).3. Put clean engine oil on the valve lifters and the lobes of the camshaft.4. Use a magnet (1) to install valve lifters (2) in the cylinder block.end by:a) install rocker shaft and push rods