STRIP-WR-YM 3807418 - Caterpillar

1 Distance-flange face-to-pinion shoulder after flange-to-pinion press fit of ... 2,28-3,81 mm .09-.15 in. ... 13,6-18,1 M. ton 15-20 ton2 Distance-shaft installation (from face of holder to parting line of steering clutch and final drive cases) ... 240,35-243,38 mm 9.458-9.582 in.3 Maximum permissible bend in shaft ... 3,17 mm .125 in.4 Torque-flange-to-final drive pinion shaft nut ... 49,79-60,82 mkg 260-340 lb. ft.5 Torque-sprocket shaft nut ... 41,49-55,32 mkg 300-400 lb. ft.6 Torque-final drive-to-steering clutch case mounting bolts ... 10,4-13,1 mkg 75-95 lb. ft.7 Torque-bearing adjusting nut ... 124,47-165,96 mkg 900-1200 lb. ft.8 Distance-sprocket face-to-spline shoulder ... 1,52-4,57 mm .06-.18 in. After sprocket-to-hub press fit of ... 18,2-22,7 M. tons 20-25 tons