STRIP 3S7183 - Caterpillar

This Revised Service Letter replaces the 25Jul2016 Service Letter. A change was made to the Service Claim Allowances.
TERMINATION DATE
31Jul2018
PROBLEM
The EMCP overlay buttons may fail to operate on certain 3512B Generator Sets, PM3512, PM3516, and PMG3516C Power Modules. The failure results in operators being unable to navigate through the controller overview and configuration menus or non operation of the Run, Stop and Auto buttons. This failure mode is not to be confused with a software reset issue while in Reduced Power Mode referenced in Engine News SEBD9946.
AFFECTED PRODUCT
Model Identification Number
3512B YAY00820, 822, 837, 844-845, 908, 917, 919, 922-925
PM3512 TC800160, 175, 177, 179-183, 185-186, 188, 203, 211-212, 223-224, 226, 228-229, 232, 238
PM3516 NBR00589-00617, 620-652, 720, 799, 845-855, 857-859, 861, 892-894
PMG3516C JKK00119, 134, 140, 172, 187, 190-191, 195, 198, 206-207, 212, 215, 219, 221-223, 225, 227, 229-230, 232
PARTS NEEDED
Qty
Part Number Description
1 4509606 CONT GP-A6001
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 23% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
If a confirmed Navigation, Run, Start or Stop button failure occurs, replace the EMCP.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-12000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.5-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.