STRIP 5S7488 - Caterpillar

Engine
Cooling System
Table 2
Status (1)    Description    Specification    Actual    Comments    
    Radiator Pressure Relief (Radiator Cap) (2)     -            
    Freezing Point of Engine Coolant     -            
    Conditioner Test of Engine Coolant     -            
    Belt Tension     -         Refer to Operation and Maintenance Manual.    
    Difference between the Upper and Lower Radiator Tank Temperatures     -            
    Jacket Water Inlet Temperature from Cooling System    
86° 6.°C (186° 11°F)            
( 1 ) N = Normal, M = Monitor, A = Action
( 2 ) Test for the pressure that is listed on the cap.Fuel System
Table 3
Status (1)    Description    Specification    Actual    Comments    
    Fuel Pressure    
324 to 648 kPa (47 to 94 psi)            
( 1 ) N = Normal, M = Monitor, A = ActionLubrication System
Table 4
Status (1)    Description    Specification    Actual    Comments    
    Engine Oil Pressure at Low Idle    
207 to 600 kPa (30 to 87 psi)            
    Engine Oil Pressure at High Idle    
338 to 600 kPa (49 to 87 psi)            
( 1 ) N = Normal, M = Monitor, A = ActionBasic Engine
Table 5
Status (1)    Description    Specification    Actual    Comments    
    Engine Speed at Low Idle     700 10 RPM            
    Engine Speed at High Idle     1820 20 RPM            
    Cylinder Cutout Test     -         Cat® Electronic Technician (Cat ET) Service Tool    
    Engine Crankcase Pressure (Blowby)     -            
( 1 ) N = Normal, M = Monitor, A = ActionAir Inlet and Exhaust System
Table 6
Status (1)    Description    Specification    Actual    Comments    
    Boost Pressure     152.4 to 203.2 CM_HSG (60 to 80 IN_HSG)            
( 1 ) N = Normal, M = Monitor, A = Action