STRIP ASSEM. 7G3017 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01397197
Install tube assembly (13). Install bolts (11). Install O-ring seal (10). Install clip (12).
Illustration 2 g01397187
Illustration 3 g01397174
Tighten top clamps (9). Install air cleaner (7). Install bolts (8).
Illustration 4 g01397147
Illustration 5 g01397143
Install element (8). Install secondary element (7). Install cover assembly (6). Install clamps (4). Install bolts (5) and nut (3).
Illustration 6 g01397132
Connect hose assembly (3). Install precleaners (2) and (1).