8W6064 STRIP Caterpillar parts
69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 785, 785B
Rating:
Alternative (cross code) number:
CA8W6064
8W-6064
8W6064
CA8W6064
8W-6064
8W6064
Weight: 5 pounds 2 kg.
QUARRY TRUCK, TRUCK,
Compatible equipment models: 8W6064:
Information:
System Operation Description:The coolant level sensor provides a means of monitoring the engine coolant level in order to warn the operator in the event that the coolant level is low. The coolant level sensor is usually located in the top tank of the radiator. The sensor should be immersed in coolant at all times.Verify that the coolant level has been programmed to "Enabled" on the configuration screen for the Caterpillar Electronic Technician (ET). If the coolant level is not programmed, Cat ET will display "Unavailable" on Cat ET.
Illustration 1 g02044940
Schematic for coolant level sensor
Illustration 2 g02046313
P1 ECM connector (P1-4) 8 V Sensor supply (P1-5) Digital sensor return (P1-46) Coolant level sensor
Illustration 3 g02046255
Terminal locations for the analog sensors at the machine interface connector (16 and 20 cylinder engines) (8) 8 V Supply (9) Digital return (36) Coolant level sensorTest Step 1. Inspect Electrical Connectors and Wiring
Place the engine control in the OFF/RESET mode.
Thoroughly inspect the ECM connector, the customer connector, and the connector for the coolant level sensor that is in the circuit. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector, the customer connector, and the sensor connector that is associated with the circuit for the coolant level sensor.
Check the ECM Connector (allen head screw) for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Check the customer connector (allen head screw) for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.Expected Result:All connectors, pins, and sockets are completely coupled and/or inserted, and the harness and wiring are free of corrosion, of abrasion, and of pinch points.Results:
OK - The connectors and wiring are OK. Proceed to Test Step 2.
Not OK - There is a problem with the connectors and/or with the wiring.Repair: Repair the wiring and connectors or replace the wiring or the connectors. Ensure that all of the seals are properly connected. Verify that the repair eliminates the problem.Verify that the repair eliminates the problem.STOPTest Step 2. Verify that the Coolant Level Sensor is Installed
Locate the coolant level sensor on the engine. Verify that a coolant level sensor is installed on the engine.Expected Result:The coolant level sensor is installed.Results:
OK - The coolant level sensor is installed. Proceed to Test Step 3.
Not OK - The coolant level sensor is not installed.Repair: Change the parameter for the coolant level sensor to "Not Installed". Verify that the repair eliminates the problem.STOPTest Step 3. Check the Coolant Level
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Stop the engine.
After allowing the engine to cool, check the coolant level. Refer to the Operation and Maintenance Manual for the proper procedure to check the coolant level.Expected Result:The coolant is at the proper level.Results:
OK - The coolant is at the proper level. Proceed to Test
Illustration 1 g02044940
Schematic for coolant level sensor
Illustration 2 g02046313
P1 ECM connector (P1-4) 8 V Sensor supply (P1-5) Digital sensor return (P1-46) Coolant level sensor
Illustration 3 g02046255
Terminal locations for the analog sensors at the machine interface connector (16 and 20 cylinder engines) (8) 8 V Supply (9) Digital return (36) Coolant level sensorTest Step 1. Inspect Electrical Connectors and Wiring
Place the engine control in the OFF/RESET mode.
Thoroughly inspect the ECM connector, the customer connector, and the connector for the coolant level sensor that is in the circuit. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector, the customer connector, and the sensor connector that is associated with the circuit for the coolant level sensor.
Check the ECM Connector (allen head screw) for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.
Check the customer connector (allen head screw) for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for details.Expected Result:All connectors, pins, and sockets are completely coupled and/or inserted, and the harness and wiring are free of corrosion, of abrasion, and of pinch points.Results:
OK - The connectors and wiring are OK. Proceed to Test Step 2.
Not OK - There is a problem with the connectors and/or with the wiring.Repair: Repair the wiring and connectors or replace the wiring or the connectors. Ensure that all of the seals are properly connected. Verify that the repair eliminates the problem.Verify that the repair eliminates the problem.STOPTest Step 2. Verify that the Coolant Level Sensor is Installed
Locate the coolant level sensor on the engine. Verify that a coolant level sensor is installed on the engine.Expected Result:The coolant level sensor is installed.Results:
OK - The coolant level sensor is installed. Proceed to Test Step 3.
Not OK - The coolant level sensor is not installed.Repair: Change the parameter for the coolant level sensor to "Not Installed". Verify that the repair eliminates the problem.STOPTest Step 3. Check the Coolant Level
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Stop the engine.
After allowing the engine to cool, check the coolant level. Refer to the Operation and Maintenance Manual for the proper procedure to check the coolant level.Expected Result:The coolant is at the proper level.Results:
OK - The coolant is at the proper level. Proceed to Test
Caterpillar parts catalog:
Parts strip Caterpillar catalog:
1H2629
STRIP-INSULATION
1090, 1190, 1190T, 120G, 120M, 120M 2, 1290T, 12E, 12G, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14E, 14G, 14H, 14M, 16, 160G, 160H, 160M, 160M 2, 160M ...
1090, 1190, 1190T, 120G, 120M, 120M 2, 1290T, 12E, 12G, 12M 2, 12M 3, 12M 3 AWD, 130G, 1390, 140G, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14E, 14G, 14H, 14M, 16, 160G, 160H, 160M, 160M 2, 160M ...
3660299
STRIP
773E
773E
7D9721
STRIP
768B, 769, 769C, 772, 773B, 777, 777B
768B, 769, 769C, 772, 773B, 777, 777B
9D5317
STRIP
120G, 769C, 773B, 776, 777, 777B
120G, 769C, 773B, 776, 777, 777B
2G5867
STRIP
769C
769C
6G3831
STRIP ASSEM.
769C, 772B, 773B
769C, 772B, 773B
6N6043
STRIP
768C, 769C
768C, 769C
7N8368
STRIP
768C, 769C
768C, 769C
9P5317
STRIP
769C
769C
6G8033
STRIP
773B, 785
773B, 785
5T0121
STRIP
785
785
7K9474
STRIP
769C
769C
6G3076
STRIP
769C, 771C, 772B, 773B, 775B, 776C, 777, 777B
769C, 771C, 772B, 773B, 775B, 776C, 777, 777B
2G2258
STRIP
768C, 769C, 771C, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789
768C, 769C, 771C, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789
8W6063
STRIP
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D
768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D
2G6916
STRIP
776C, 776D, 777, 777B, 777D
776C, 776D, 777, 777B, 777D
8T2510
STRIP-FILM
776C
776C
2W3133
STRIP
776C, 776D, 777, 777B, 777D
776C, 776D, 777, 777B, 777D
6G9704
STRIP
785, 785B, 785C, 785D, 789, 789B, 789C, 789D
785, 785B, 785C, 785D, 789, 789B, 789C, 789D
8X9880
STRIP
784B, 784C
784B, 784C
6G5801
STRIP
784B
784B
5T4224
STRIP
784B, 784C, 785, 785B, 785C, 785D
784B, 784C, 785, 785B, 785C, 785D
8W5011
STRIP
784B, 784C, 785, 785B, 785C
784B, 784C, 785, 785B, 785C
2W3082
STRIP
784B, 785, 785B, 785C, 789, 789B
784B, 785, 785B, 785C, 789, 789B