9S4321 STRIP Caterpillar parts
983, D8H
Rating:
Alternative (cross code) number:
CA9S4321
9S-4321
9S4321
CA9S4321
9S-4321
9S4321
Weight: 28 pounds 12 kg.
TRACK LOADER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$15.03
22 Jan 2024
US: Florida-Parts-Z
9S4321 - Strip 1P3318 fits Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$18.44
31 Mar 2022
US: Florida-Parts-Z
1P3318 - Strip 9S4321 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$15.03
31 Mar 2022
US: Florida-Parts-Z
9S4321 - Strip 1P3318 fits Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g02114239
Note: Discard clamp assemblies (1) after use.
Loosen clamp assemblies (5) and disconnect both hose assemblies.
Disconnect hose assembly (3) and loosen clamp assembly (1) .
Remove bolts (2) and remove precooler (4) .
Discard clamp assembly (1) .
Illustration 2 g02114637
Loosen clamp assembly (7) and remove elbow (6) from precooler (4). Discard clamp assembly (7) .
Remove bolts (9). Remove flange assembly (8) and remove the O-ring seal. Repeat this step for the other flange assembly.
Illustration 3 g02114754
Loosen clamp assembly (10) and remove elbow assembly (11) .
Discard clamp assembly (10) after use.
Illustration 4 g02114814
Note: Discard bellows (13) and clamp assemblies (12) after the clamp assemblies have been loosened.
Loosen clamp assemblies (12). Remove elbow (12) from bellows (13). Remove elbow (14) from bellows (13) .
Discard bellows (13) and clamp assemblies (12) .
Illustration 5 g02114933
Remove bolts (16) and (17). Remove bracket (15) .Installation Procedure
Install the precooler in the reverse order of removal.
Tighten new clamp assemblies (10), (12), (7) and (1) to a torque of 8.5 2 N m (75 18 lb in).
Tighten clamp assemblies (3) and (5) to a torque of 7.3 0.5 N m (65 4 lb in).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g02114239
Note: Discard clamp assemblies (1) after use.
Loosen clamp assemblies (5) and disconnect both hose assemblies.
Disconnect hose assembly (3) and loosen clamp assembly (1) .
Remove bolts (2) and remove precooler (4) .
Discard clamp assembly (1) .
Illustration 2 g02114637
Loosen clamp assembly (7) and remove elbow (6) from precooler (4). Discard clamp assembly (7) .
Remove bolts (9). Remove flange assembly (8) and remove the O-ring seal. Repeat this step for the other flange assembly.
Illustration 3 g02114754
Loosen clamp assembly (10) and remove elbow assembly (11) .
Discard clamp assembly (10) after use.
Illustration 4 g02114814
Note: Discard bellows (13) and clamp assemblies (12) after the clamp assemblies have been loosened.
Loosen clamp assemblies (12). Remove elbow (12) from bellows (13). Remove elbow (14) from bellows (13) .
Discard bellows (13) and clamp assemblies (12) .
Illustration 5 g02114933
Remove bolts (16) and (17). Remove bracket (15) .Installation Procedure
Install the precooler in the reverse order of removal.
Tighten new clamp assemblies (10), (12), (7) and (1) to a torque of 8.5 2 N m (75 18 lb in).
Tighten clamp assemblies (3) and (5) to a torque of 7.3 0.5 N m (65 4 lb in).
Caterpillar parts catalog:
Parts strip Caterpillar catalog:
9S1023
STRIP
983
983
9S1024
STRIP
983
983
583H, 983, D8H
9S3576
STRIP
977K, 983, D7G
977K, 983, D7G
7S2542
STRIP
983, 983B
983, 983B
7S2550
STRIP
983
983
3S1114
STRIP
977K
977K
5S7164
STRIP
977K
977K
8S3738
STRIP
120, 14E, 561C, 627, 941, 950, 966C, 977K, 980B, D4D, D5, D6C
120, 14E, 561C, 627, 941, 950, 966C, 977K, 980B, D4D, D5, D6C
9S3761
STRIP
983, D7F, D8H, D8K, D9G
983, D7F, D8H, D8K, D9G
571G, 572G, 977K, 977L, D7F, D7G, D7G2
8S0336
STRIP
D5, D6C
D5, D6C