STRUT 0662054 - Caterpillar

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01157645
Position fan motor (20) and install bolts (19) .
Illustration 2 g01157698
Install boss (18) . Install nut (17) . Tighten nut (17) to a torque of 70 N m (52 lb ft).
Illustration 3 g01157632
Position spider assembly (16) and install bolts (15) .
Illustration 4 g01157611
Attach a suitable lifting device to the suction fan and fan motor (13) and position the suction fan and fan motor (13) . The weight of the suction fan and fan motor (13) is approximately 50 kg (110 lb). Install bolts (14) .
Illustration 5 g01157598
Install guard assemblies (12) . Install tube assemblies (10) and (11) .
Illustration 6 g01157584
Illustration 7 g01157588
Position duct assembly (9) and install bolts (8) . Tighten clamp (7) to a torque of 13 3 N m (115 27 lb in).
Illustration 8 g01157573
Position cover assembly (5) and install bolts (6) (not shown). Install radiator cap (4) . Install support assembly (3) .
Illustration 9 g01157571
Position panel assembly (2) and install bolts (1) .End By: Install the exhaust extension. Refer to Disassembly and Assembly, "Exhaust Extension - Remove and Install".