AVSPARE.COM
parts catalog

STUD 0002430 - Caterpillar



0002430 STUD Caterpillar parts STUD
Rating:
61
Alternative (cross code) number:
CA0002430
000-2430
0002430
Caterpillar 0002430 STUD

Buy STUD 0002430 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g01004756
Schematic of the Position Sensor for the Decelerator PedalNote: The transmission fuse supplies operating power to the sensor and the ECM. The sensor does not connect directly to the frame ground. The sensor connects to the return circuit of the ECM. The ECM internally connects the return wire to frame ground.This diagnostic code is recorded when the ECM detects the signal of the sensor as being out of calibration.In order to correct this diagnostic code, calibrate the sensor. Perform the calibration procedure for the position sensor. See Testing and Adjusting, "Position Sensor (Deceleration Pedal) - Calibrate" for more information.Test Step 1. CALIBRATION
Perform the calibration procedure for the position sensor (deceleration pedal).Expected Result:The calibration procedure was performed successfully.Results:
YES - The calibration procedure was performed successfully. Resume normal machine operation.STOP
NO - The calibration was not successful.Repair: Repeat the calibration procedure for the position sensor (deceleration pedal).STOP


Parts stud Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.