STUD A 0385435 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-9758     Jack Stand     1    
Illustration 1 g00342997
Attach a suitable hoist and lifting chains to bucket (6) .
Use the hoist in order to put bucket (6) in position on the lift arms. The weight of the bucket is 1345 kg (2965 lb).
Apply 5P-0960 Molybdenum Grease to all of the pin bores.
Illustration 2 g00342995
Align the bores of the bucket with the bores of the lift arms.
Put the washers in position. Install pin (5) .
Install the spacer, the washer, and bolt (4) that holds pin (5) .
Repeat Steps 4 through 6 in order to install the washers and the pin in the opposite side of the bucket.
Illustration 3 g00342993
Align the bore of bucket tilt link (1) with the bores of the bucket.
Install pin (3) .
Install the spacer, the washer, and bolt (2) that holds pin (3) .
Illustration 4 g00342992
Remove Tooling (A) from bucket tilt link (1) .End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".