STUD-EXHAUST MANIFOLD 0676102 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01165916
Illustration 2 g01165917
Install the O-ring seal and torque converter inlet relief valve (4) .
Position transmission hydraulic control relief valve (3) and install bolts (2). Tighten bolts (2) to a torque of 30 4 N m (22 3 lb ft).
Install hose assemblies (1) .End By: Install the cab.