AVSPARE.COM
parts catalog

STUD-TAPERLOCK 3727841 - Caterpillar



3727841 STUD-TAPERLOCK Caterpillar parts D9R STUD
Rating:
86
Alternative (cross code) number:
CA3727841
372-7841
3727841
Caterpillar 3727841 STUD-TAPERLOCK
Weight: 1 pounds 0 kg.

Buy STUD-TAPERLOCK 3727841 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3727841:

TRACK-TYPE TRACTOR  D9R   Caterpillar
Number on catalog scheme: 18
 
  For full view, you need register

Information:


Be careful not to damage the carrier bearing surface on the drive shaft when it is lowered from the machine.
1. Remove bolts (3) and straps (2) that hold front drive shaft (1) to the differential pinion shaft.2. Lower the front drive shaft from the machine. Two persons can be needed to remove the drive shaft because of the weight. The weight of the unit is 25 kg (55 lb.). 3. Bend locks (4) back and remove bolts (5). Remove the cap assemblies from the spider. 4. Remove spider (6) from the drive shaft. 5. Remove spring retainer (7) that holds cap assemblies (8).6. Remove cap assemblies (8) from the spider.Install Front Drive Shaft
1. Put clean grease on the needle bearings to hold them in place in caps (2).2. Install caps (2) on the spider and install spring retainer (1) that holds the caps. 3. Put spider (3) in position on the drive shaft. 4. Put clean grease on the needle bearings to hold them in place in cap (4).5. Install caps (4) that hold the spider in place on the drive shaft.6. Install the locks and bolts. Tighten the bolts to a torque of 50 7 N m (37 5 lb.ft.). 7. Put front drive shaft (5) in position on the differential pinion shaft. Install the straps and the bolts. Tighten the bolts to a torque of 135 15 N m (100 11 lb.ft.). end by:a) install drive shaft carrier bearing

Caterpillar parts catalog:

Caterpillar parts catalog
D9R Track-Type Tractor HWH00001-UP (MACHINE) POWERED BY 3408C Engine
D9R TRACK-TYPE TRACTOR JJB00001-UP (MACHINE) POWERED BY 3408C Engine
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine


Parts stud Caterpillar catalog:

1913026 STUD
D10N, D10R, D8R II
8D1807 STUD
14G, 16G, D11R, D11T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.