STUD 3G1863 - Caterpillar

"Implement Control" - The system is communicating with the ECM controlling the valves.
"The flashing icon indicates, Auto Not Allowed." - Flashing icon indicates the machine state does not support grade control or a fault.
Manual Control is selected.
Working with Menus and Dialogs
Before work can begin, the configuration and setup information must be entered into the system. View the current state of the system. Changes are made by working with screens called menus and dialogs. Menus allow the selection of a dialog. Dialogs allow the user to specify setup and configuration information or to view information about the state of system components.The Cat Grade and Slope System can support one or two displays on pavers. The Cat Grade and Slope System can support up to four displays on cold planers.Each display can control one or both sides. Both displays on the pavers can be used to configure the system settings. The two bottom displays on the cold planers can be used to configure the system settings. If the display controls both sides of the machine, for single display operation, an additional menu may be displayed. The additional menu is used to determine which side of the machine the settings should be applied.
Illustration 4 g02435098
(20) Indicates that there is a submenu item within the menu item. (21) Indicates which menu is open. (22) Indicates which menu items are available for selection. The menu item that is highlighted has a black background.Menus
Menus allow you to choose another menu or a dialog from a list. In order to enter the menu, press the menu key (4). To move through the menu items, use the arrow keys. Once you highlight the item you want to view, press the "OK" key (8) in order to select the item.In order to leave a menu without making a selection, and return to the previous screen, press escape. In order to leave a menu without making a selection, and return to the guidance screen, press the "Menu" key (4) .Dialogs
Dialogs allow you to enter data into the Cat Grade and Slope System. Dialogs can contain any of the following items:Rolling number fields - Rolling number fields allow you to enter numerical values, such as the calibrated cross slope.Sliders - Sliders allow you to enter numerical values, such as valve speed.Lists - Lists allow you to select a single item from a list of items, such as a list of available sensors.Understanding Grade Indicator Information
The Cat Grade and Slope System uses ten LED indicators integrated into the soft keys. The LED indicators provide the operator with guidance information.On each side of the display there are five LED indicators in two colors, as shown in Illustration 5.
Illustration 5 g01607534
(14) Amber LED (15) Green LED (16) Amber LEDWhen the screed is within the on-grade tolerance, the center green LED is illuminated. If any LED, other than the center green LED is illuminated, the screed is off grade.Table 2 describes the possible LED patterns that may be displayed.
Table 2
"LED "    "LED" Pattern