STUD-WELD 8J6910 - Caterpillar

REBE1851-00
11Apr2007
B150
B370
B420
H200
H370
H374
H380
Before/After
(Limited distribution)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE INFORMATION LABEL ON CERTAIN 3512C GENERATOR SETS
0653 7557 1901 PS42379
This Program must be administered either before or after failure.In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42379" as the Part Numberand "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
30Apr2009
PROBLEM
The existing Engine Information Label on certain 3512C Generator Set contains inaccurate engine information
AFFECTED PRODUCT
Model Identification Number
3512 SBG00154-00157, 159-160, 162-164, 166, 169-186
PARTS NEEDED
No parts needed for this program
ACTION REQUIRED
1. Replace the current Engine information label.
If you have not already received the label please follow these steps to obtain a new label:
- Send in a request for a new engine information label via email to Schluttenhofer_David_H and Dawodu_Olufemi.
- Include a contact name and address for the engine information label to ship to.
2. Once, the label has been received, connect Caterpillar Electronic Technician (ET) to the engine and pull up the ?Monitoring System? under the ?Service? menu tab. Change the altitude derate trip point setting from the current value to 13.5psi (see images 1 & 2)
Image 3 is a sample engine information label for reference.
Image1
Image2
Image3
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.