STUD 8X8928 - Caterpillar

Illustration 1 g03890447
Table 1
Specification for 250-2353 Transmission Oil Pump Gp
Item Qty Part Specification Description
Before operation, the pump must be lubricated with clean oil and the pump must turn freely by hand.
A 1 250-2360 Shaft Diameter is 31.742 0.005 mm (1.2497 0.0002 inch).
B 1 250-2362 Shaft Diameter is 31.742 0.005 mm (1.2497 0.0002 inch).
Illustration 2 g03890448
8E-1171 Oil Pump Body As
Table 2
Item Qty Part Specification Description
C 4 8M-8489 Dowel Extension of the dowel from the surface of the body is 5.0 0.5 mm (0.20 0.02 inch).
Illustration 3 g03890449
250-2354 Body
Table 3
Item Qty Part Specification Description
E - - Location of bushing joint from the vertical center line is 30 15 degrees.
F 2 8M-8489 Dowel Extension of the dowel from the surface of the oil pump body is 5.0 0.5 mm (0.20 0.02 inch).
1 2 7M-9338 Bushing Bore before assembly is 31.786 0.008 mm (1.2514 0.0003 inch).
Installation depth (G) is 1.5 0.5 mm (0.06 0.02 inch).
Illustration 4 g03890465
250-2357 Manifold
Table 4
Item Qty Part Specification Description
J - - Location of bushing joint from the vertical center line is 30 15 degrees.
2 2 5M-1995 Bushing Bore before assembly is 31.786 0.008 mm (1.2514 0.0003 inch).
Installation depth (K) is 1.5 0.5 mm (0.06 0.02 inch).
Illustration 5 g03890466
7S-6978 Pump Cover
Table 5
Item Qty Part Specification Description
M - - Location of bushing joint from the vertical center line is 30 15 degrees.
3 2 5M-1995 Bushing Bore before assembly is 31.786 0.008 mm (1.2514 0.0003 inch).
Installation depth (N) is 1.50 0.25 mm (0.059 0.010 inch).