STUD 9X8901 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0808 Multipurpose Grease -
Illustration 1 g01142583
Install the O-ring seals on tube assembly (17). Apply Tooling (A) to the O-ring seals. Position tube assembly in the engine oil pan. Install bolts (19) and tighten to a torque of 47 9 N m (35 7 lb ft).
Install oil housing (18) on tube assembly (17). Install bolts (16) and tighten to a torque of 47 9 N m (35 7 lb ft).
Install the O-ring seal on suction tube (15). Apply Tooling (A) to the O-ring seal. Install suction tube (15) into oil housing (18). Install clamp (14) and bolts (13).
Install the O-ring seal on drain plug (12). Install drain plug (12) and tighten to a torque of 145 15 N m (107 11 lb ft).
Illustration 2 g01142529
Install suction screen assembly (9) on adapter (11). Install bolts (8).
Install O-ring seal (10) and adapter (11) on the engine oil pan.
Install O-ring seal (5) and cover (6) on the engine oil pan.
Install gasket (4) and engine oil level gauge (3).
Install O-ring seal (2) and connector (1).
Install the O-ring seal on drain plug (7). Install drain plug (7) and tighten to a torque of 145 15 N m (107 11 lb ft). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install".