SUPPORT UNIT 0968192 - Caterpillar

Figure 63Remove input clutch housing cap screws and washers.
Figure 64Loosen the assembly in the housing with pry bars in the pry slots. Remove input clutch, bearing cap and input flange as an assembly.
Figure 65Remove the piston rings from the shaft.
Figure 66Remove the snap ring that holds the bearing.
Figure 67Remove the bearing from the shaft.
Figure 68Remove the inner snap ring.
Figure 69Remove the input gear and its bearing from the shaft.
Figure 70Remove the clutch disc backing plate retainer ring. Remove backing plate.
Figure 71Remove the inner and outer clutch discs.
Figure 72Remove the inner bearing with a bearing puller tool.
Figure 73Compress the return spring and remove the snap ring. Remove the spacer, spring retainer, spring and piston assembly. Some units will not have a spacer.
Be careful when you remove the snap ring and release spring. The spring is under compression.
Figure 74Remove the nut, washer and "O" ring from the pinion shaft. Remove input flange.
Figure 75Remove the input shaft and clutch drum.
Figure 76Input shaft and clutch drum removed from clutch housing.
Figure 77Remove the input clutch shaft bearing cap.