SUPPORT 0992398 - Caterpillar

Illustration 1 g00574000
Typical exampleThe display shows a time of "10:25:55" (10 hours, 25 minutes and 55 seconds).
Turn the disconnect switch to the ON position.
Turn the engine start switch to the ON position.
Illustration 2 g00572243
Press the key for the main menu.
Table 1
                   
        MAIN MENU            
    1:     PREFERENCES MENU            
    2:     EVENT MENU        
    3:     SYSTEM MENU            
    4:     SERVICE OPTIONS            
    5:     PERFORMANCE MENU        
               
Select option "4" ("service options") and press the OK key or press "4" on the keypad.
Table 2
                   
        SERVICE OPTIONS            
    1:     START MANUAL LUBE            
    2:     PERFORM CALIBRATION            
               
               
               
               
Select option "2" ("perform calibration") and press the OK key or press "2" on the keypad.
The option "SET CLOCK" will be displayed on the screen. Press the OK key.
Follow the instructions that are on the screen in order to set the clock.
When the clock is set, press the OK key. A message will be displayed in order to confirm your selection. You will return to the default display.Note: The clock is not affected if the battery disconnect switch is placed in the OFF position or if the batteries are disconnected. The clock will keep the correct time for one month without power.