SUPPORT AS 1014632 - Caterpillar

Illustration 1 g03259019
Table 1
189-3826 Ejector Cylinder Gp
Item Qty Part Specification Description
1 12 0S-1603 Bolt Apply Loctite 271 to the bolt threads prior to assembly.
Torque the bolts to 115 7 N m (85 5.0 lb ft) with the cylinder fully extended.
2 - - Bore of a new outer cylinder 184.15 + 0.1 - 0.0 mm (7.250 + 0.004 - 0.000 inch).
3 - - Diameter of a new first stage cylinder 171.45 + 0.0 - 0.10 mm (6.75 + 0.000 - 0.004 inch).
4 - - Bore of a new first stage cylinder 152.4 + 0.1 - 0.0 mm (6.0 + 0.004 - 0.000 inch).
5 - - Diameter of a new second stage cylinder 139.71 + 0.0 - 0.1 mm (5.500 + 0.000 - 0.004 inch).
6 - - Bore of a new second stage cylinder 127 + 0.1 - 0.0 mm (5.0 + 0.004 - 0.000inch).
7 - - Diameter of a new third stage cylinder 114.3 + 0.0 - 0.10 mm (4.50 - 0.00 + 0.004 inch).
8 - - Bore of a new third stage cylinder 101.6 + 0.1 - 0.0 mm (4.00 + 0.004 - 0.000 inch).
9 - - Diameter of a new fourth stage cylinder 88.9 + 0.0 - 0.1 mm (3.50 + 0.000 - 0.004 inch).
10 - - Bore of a new outer stage bush 171.63 0.05 mm (6.757 0.002 inch).
11 - - Bore of a new first stage bush 139.80 0.05 mm (5.504 0.002 inch).
12 - - Bore of a new second stage bush 114.40 0.05 mm (4.504 0.002 inch).
13 - - Bore of a new third stage bush 89.00 0.05 mm (3.504 0.002 inch).
14 - - Apply Loctite 620 to the threads prior to assembly.
Torque to 1900 N m (1400 lb ft).
- - - Lightly lubricate the sealing lips with the lubricant being sealed.
- - - Apply Loctite C5A to the pins that hold the cylinders to the ejector body and the ejector plate prior to assembly.