SUPPORT AS 1425415 - Caterpillar

1. Mark and identify wires (2), (3), and (4) for installation purposes. Loosen three screws (5) on shutoff switch (1). Remove wires (2), (3), and (4) from shutoff switch (1). 2. Lift switch guard (6) on the switch plate. Remove two nuts (7) and the washer from shutoff switch (1). Remove shutoff switch from the switch plate. The following steps are for the installation of the switch (engine room shutoff). 3. Put shutoff switch (1) in the switch plate. Install two nuts (7) and the washer on shutoff switch (1). Lower switch guard (6) on the switch plate. 4. Put wires (2), (3), and (4) on shutoff switch (1). Tighten three screws (5) on shutoff switch (1).