SUPPORT AS 1494547 - Caterpillar

Illustration 1 g01255983
(1) Lubricate the groove and lubricate the O-ring seal immediately prior to assembling the bearing. (2) 9M-8808 Springs Test force ... 80 2.22 N (18 0.5 lb) Test length ... 15.52 mm (0.611 inch) Free length after test ... 22.53 mm (0.887 inch) Outside diameter ... 9.83 1.70 mm (0.387 0.067 inch) (3) Tighten the 126-1499 Bolt to the following torque. ... 270 40 N m (200 30 lb ft) (4) Lubricate the bore and lubricate the seal. Use the lubricant to be sealed. (5) Tighten the 263-9575 Bolt to the following torque. ... 125 10 N m (90 7 lb ft)Note: Apply 9S-3263 Thread Lock Compound to the threads. (6) Torque for the plug ... 90 15 N m (66 11 lb ft) (7) Lubricate the sealing lip lightly. Use the lubricant to be sealed. (8) 3P-7566 Springs Test force ... 305 16 N (68.5 3.5 lb) Test length ... 74.4 mm (2.93 inch) Free length after test ... 86.1 mm (3.4 inch) Outside diameter ... 16.36 mm (0.64 inch) (9) 9J-3999 Springs Test force ... 308.71 24.91 N (69.4 5.6 lb) Test length ... 49.53 mm (1.95 inch) Free length after test ... 59.18 mm (2.33 inch) Outside diameter ... 14.7 0.3 mm (0.579 0.012 inch) (10) 5M-1654 Springs Test force ... 172.59 14.23 N (38.8 3.2 lb) Test length ... 46.74 mm (1.84 inch) Free length after test ... 53.52 mm (2.107 inch) Outside diameter ... 14.22 mm (0.56 inch) (11) 140-2741 Springs Test force ... 1724 138 N (387.57 31 lb) Assembled height ... 4.42 mm (0.174 inch) Outside diameter ... 136 mm (5.35 inch)
Table 1
Speed Selection    
Speed     Engaging clutches    
Reverse     C & E    
First Gear Forward     A & E    
Second Gear Forward     A & D    
Third Gear Forward     A & C    
Fourth Gear Forward     A & B    
Fifth Gear Forward     B & C    
Sixth Gear Forward     B & D     (A) Manufactured thickness of 5 134-8360 Friction Discs ... 4 .08 mm (0.16 0.003 inch) (B) (C) (D) Manufactured thickness of 9 140-2371 Friction Discs ... 5.18 .08 mm (0.201 0.003 inch) (E) Manufactured thickness of 6 6Y-2027 Friction Discs ... 4.95 0.1 mm (0.195 0.004 inch)Note: In order to reuse the clutch plates and disc assemblies that are contained in this transmission, refer to Guideline for Reusable Parts and Salvage Operations, SEBF8115-01.