SUPPORT 1715818 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7574     Link Bracket     2    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00859870
Use Tooling (A) and a suitable lifting device in order to position drift reduction valve (8). Install bolts (7). The weight of drift reduction valve (8) is approximately 40 kg (85 lb).
Illustration 2 g00859863
Position tube assembly (5) and install bolts (3). Connect hose assembly (4) and harness assembly (6) .
Illustration 3 g01258606
Position cover (2) and install bolts (1) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".