SUPPORT AS 1832570 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     187-2718     Filter Wrench As     1    
Illustration 1 g01146695
Install tube assembly (14) and the O-ring seals to engine oil cooler core (9). Install bypass tube (16) and the O-ring seals. Install manifold assembly (15) to engine oil cooler (9). Install tube assembly (5) and the O-ring seal to manifold assembly (15).
Illustration 2 g01146698
Install the O-ring seal to bonnet (12). Position cooler core (9) and manifold assembly (15) as one unit. Install O-ring seals and connect tube assembly (14) to the engine block. Install bracket (13) .
Illustration 3 g01146701
Use Tooling (A) to install engine oil filter (11). Connect bracket (10).
Illustration 4 g01146697
Install the O-ring seal to cooler core (9). Install inlet bonnet (7) and the integral seal. Install bolts (6). Install bracket (8).
Illustration 5 g01146699
Install the O-ring seal to oil filter adapter (4) and connect tube assembly (5) .
Illustration 6 g01146700
Connect hoses (3) .
Illustration 7 g01146685
Use two people to install access panels (1) and (2). The weight of access panel (1) is approximately 36 kg (80 lb). The weight of access panel (2) is approximately 36 kg (80 lb).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Add the correct amount of engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".