SUPPORT AS 1884423 - Caterpillar

Illustration 22
Grip grooves have rubber fragments.
Use again---
after cleaning.
Illustration 23
Stem taper has a raised burr which will tear hose's inner liner.
Use again---
after deburring.
Do not reuse an XT coupling unless it is first resized. XT couplings that are not resized can separate (blow-off) from the hose assembly and possibly cause personal injury.
Illustration 24
Resizing tool will not fit in end of coupling. Stem has not been resized.
Use again---
after resizing.
Illustration 25
Stem is not straight after resizing.
Do not use again
Illustration 26
The end of the stem has mushroomed.
Do not use again
Coupling
Illustration 27
Coupling has normal wear, minor dents, scratches, nicks, etc.
Use again
after reconditioning by filing or sanding.
It is permissible to use couplings that have had the zinc-chromate coating removed by bead blasting or exposure to non-caustic chemicals. Such couplings should be painted after they are assembled onto hoses to prevent corrosion damage.
Illustration 28
Coupling has been repaired by welding.
Do not use again
Caterpillar does not recommend welding on hose couplings. Welding could cause localized stresses which can lead to reduced fatigue strength and performance life.
Illustration 29
Coupling has been exposed to fire.
Do not use again
Collet
Illustration 30
Fingers have surface cracks in zinc-chromate coating.
Use again
Illustration 31
Finger has a raised burr(s).
Use again---
after deburring.
Illustration 32
Collet has a cracked or missing finger.
Do not use again
Sleeve
Illustration 33
Sleeve is cracked.
Do not use again
Illustration 34
Sleeve does not have a straight, cylindrical shape.
Do not use again
Illustration 35
Sleeve does not have a circular shape.
Do not use again