1922940 SUPPORT AS Caterpillar parts
385B, 5090B
Rating:
Alternative (cross code) number:
CA1922940
192-2940
1922940
CA1922940
192-2940
1922940
EXCAVATOR, FRONT SHOVEL,
Number on catalog scheme:
1
For full view, you need register
Information:
Data Links
Cat Data Link
The Cat Data Link is an input and an output of the Machine ECM. The Cat Data Link connects to the Machine ECM at connector contact J2-16 and J2-25. The data link is designed to carry communications between the controller and the monitor. The data link is not a visible component. The data link consists of internal control circuits and a harness wiring. The data link is bidirectional. The controller can receive information and the controller can send information through the data link. The controller sends information about the fuel level, temperature of the engine coolant, and many other signals to the monitor panel.
Illustration 1 g02140527
Schematic of the Cat Data LinkCAN Data Link
The CAN data link is used for communication between the following modules: Machine ECM, Switch Panel and Monitor. Two 120 Ohm terminating resistors must be installed in the wiring harness in order for the CAN data link to function properly.
Illustration 2 g02327555
Schematic of the "CAN Data Link" circuitAction Alarm
The action alarm SOUNDS in order to alert the operator when a high emergency condition is present. For example, when the engine oil pressure decreases below the set value.Travel Alarm
The travel alarm SOUNDS in order to alert the people within the area that the machine is ready to be moved.
Cat Data Link
The Cat Data Link is an input and an output of the Machine ECM. The Cat Data Link connects to the Machine ECM at connector contact J2-16 and J2-25. The data link is designed to carry communications between the controller and the monitor. The data link is not a visible component. The data link consists of internal control circuits and a harness wiring. The data link is bidirectional. The controller can receive information and the controller can send information through the data link. The controller sends information about the fuel level, temperature of the engine coolant, and many other signals to the monitor panel.
Illustration 1 g02140527
Schematic of the Cat Data LinkCAN Data Link
The CAN data link is used for communication between the following modules: Machine ECM, Switch Panel and Monitor. Two 120 Ohm terminating resistors must be installed in the wiring harness in order for the CAN data link to function properly.
Illustration 2 g02327555
Schematic of the "CAN Data Link" circuitAction Alarm
The action alarm SOUNDS in order to alert the operator when a high emergency condition is present. For example, when the engine oil pressure decreases below the set value.Travel Alarm
The travel alarm SOUNDS in order to alert the people within the area that the machine is ready to be moved.
Caterpillar parts catalog:
Parts support Caterpillar catalog:
3406E, 385B, 5090B, AD30, C-15, C-16, C-18, C15, C18, CX35-P800
1176256
SUPPORT AS
311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 321B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 5110B, 539, M325B, W3...
311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 321B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 5110B, 539, M325B, W3...
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 33...
1750745
SUPPORT AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1906915
SUPPORT
385B, 5090B
385B, 5090B
1734955
SUPPORT AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1390, 2590, 320B, 320C, 322B L, 322B LN, 322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 326D L, 328D LCR, 329D, 329...
1484778
SUPPORT AS
345C, 365B, 365B II, 365B L, 365C, 365C L, 385B, 385C, 385C L
345C, 365B, 365B II, 365B L, 365C, 365C L, 385B, 385C, 385C L
1766420
SUPPORT
325D L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
325D L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1565405
SUPPORT
365B, 365B II, 385B, 5090B
365B, 365B II, 385B, 5090B
1565407
SUPPORT-LINER
365B, 365B II, 385B, 5090B
365B, 365B II, 385B, 5090B
1766419
SUPPORT-LINER
365B, 365B II, 385B, 5090B
365B, 365B II, 385B, 5090B
2023773
SUPPORT AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1968170
SUPPORT AS
385B, 5090B
385B, 5090B
1750691
SUPPORT AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1750689
SUPPORT AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1775627
SUPPORT AS
365B, 365B II, 365B L, 385B, 385C, 385C L, 5090B
365B, 365B II, 365B L, 385B, 385C, 385C L, 5090B
1565420
SUPPORT
365B, 365B II, 385B, 5090B
365B, 365B II, 385B, 5090B
1566513
SUPPORT AS
365B, 365B II, 385B, 5090B
365B, 365B II, 385B, 5090B
1244005
SUPPORT
365B, 365B II, 365B L, 385B, 5090B
365B, 365B II, 365B L, 385B, 5090B