2058167 SUPPORT Caterpillar parts
Alternative (cross code) number:
Illustration 5 g00536197
Install four bolts (16) and the washers in plate (15) .Note: Use the following procedure to install the walkway and the fender on both sides of the machine.
Illustration 6 g00536465
Fasten a hoist and suitable lifting chains to walkway (14) .
Slightly loosen three bolts (25) for installation purposes.
Illustration 7 g00536469
Slightly loosen three bolts (26) for installation purposes.
Illustration 8 g00536192
Use the hoist to carefully install the fender and walkway (14) on the machine. The weight of the fender and walkway as a unit is 490 kg (1080 lb).
Illustration 9 g00536136
Illustration 10 g00536179
Install seven bolts (13) and the washers in the ladder.
Illustration 11 g00536124
Install two bolts (12) and the washers in the walkway.
Illustration 12 g00536540
Install support (27), four bolts (11) and the washers to the fender.
Illustration 13 g00536062
Install bolt (10) and the washer.
Illustration 14 g00536014
Illustration 15 g00536048
Bolts Under the Right Fender
Illustration 16 g00536050
Bolts Under the Left Fender
Install three bolts (9) and the washers in the fender beneath the cab.
Illustration 17 g00536757
Tighten three bolts (25) .
Install tread (8) .
Install four bolts (7) and the washers.
Illustration 18 g00536762
Tighten three bolts (26) .
Install plate (6) .
Install eight bolts (5) and the washers.
Illustration 19 g00535891
Install hand rails (1), (2) and (3) .
Install fourteen bolts (4) and the washers.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.