2296690 SUPPORT GP-DRUM Caterpillar parts
CV16B
Rating:
Alternative (cross code) number:
CA2296690
229-6690
2296690
CA2296690
229-6690
2296690
VIBRATORY COMPACTOR,
Compatible equipment models: 2296690:
Information:
Gear Pump (Pilot)
Start By:
Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Pilot) - Remove" in this manual.
Failure to properly assemble parts or failure to follow established procedures can lead to damage of the parts and assembly.To avoid damage to parts, always identify and mark the parts so that they can be installed in the same location. Ensure that gear surfaces align. Never force parts during assembly.
Thoroughly clean the outside of the pilot pump. Note: During disassembly of the pilot pump, put identification marks on the parts for assembly purposes.
Illustration 1 g00536992
Remove O-ring seal (1) from the pilot pump.
Illustration 2 g00536994
Remove four socket head bolts (2). Remove the end frame from the housing.
Illustration 3 g00536995
Remove O-ring seal (3) from the frame.
Remove thrust plate (4) and the two rings from the pump housing.
Illustration 4 g00536996
Remove square ring (5) and backup ring (6) from thrust plate (4).
Illustration 5 g00536997
Remove bushings (7) from the end frame.
Illustration 6 g00536998
Remove drive gear (8) and idler gear (9) from the pump housing.
Illustration 7 g00536999
Remove two bushings (10) and two dowels (11) from the pump housing.
Start By:
Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Pilot) - Remove" in this manual.
Failure to properly assemble parts or failure to follow established procedures can lead to damage of the parts and assembly.To avoid damage to parts, always identify and mark the parts so that they can be installed in the same location. Ensure that gear surfaces align. Never force parts during assembly.
Thoroughly clean the outside of the pilot pump. Note: During disassembly of the pilot pump, put identification marks on the parts for assembly purposes.
Illustration 1 g00536992
Remove O-ring seal (1) from the pilot pump.
Illustration 2 g00536994
Remove four socket head bolts (2). Remove the end frame from the housing.
Illustration 3 g00536995
Remove O-ring seal (3) from the frame.
Remove thrust plate (4) and the two rings from the pump housing.
Illustration 4 g00536996
Remove square ring (5) and backup ring (6) from thrust plate (4).
Illustration 5 g00536997
Remove bushings (7) from the end frame.
Illustration 6 g00536998
Remove drive gear (8) and idler gear (9) from the pump housing.
Illustration 7 g00536999
Remove two bushings (10) and two dowels (11) from the pump housing.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts support Caterpillar catalog:
2713830
SUPPORT GP-TURBOCHARGER
G3516, G3516C, G3516E, G3520C, G3520E
G3516, G3516C, G3516E, G3520C, G3520E
2400330
SUPPORT GP-TRANSMISSION
844H, 844K, 990H, 990K
844H, 844K, 990H, 990K
2370447
SUPPORT GP-AIR INLET
950H, 962H, IT62H
950H, 962H, IT62H
2334842
SUPPORT GP-ENGINE & XMSN
D3G, D4G, D5G
D3G, D4G, D5G
2273012
SUPPORT GP-ENGINE & XMSN
825H, 826H
825H, 826H
2358045
SUPPORT AS-ENCLOSURE
M325C MH
M325C MH