AVSPARE.COM
parts catalog

SUPPORT AS 2444049 - Caterpillar


2444049 SUPPORT AS Caterpillar parts 3516, 3516B
Rating:
19
Alternative (cross code) number:
CA2444049
244-4049
2444049
Caterpillar 2444049 SUPPORT AS

Buy SUPPORT AS 2444049 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 2444049:

GENERATOR SET  3516   3516B   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:

Introduction
This instruction gives the procedure for installing Step Buffer, U-Cup and Double Lip Wiper Seals in the head in hydraulic cylinders.1. Install the nitrile expander ring (1) of the step buffer seal in the innermost seal groove of the cylinder head (4).2. Install the Teflon seal ring (2) of the step buffer seal in the same groove, on top of the expander ring with the step cut facing the piston end of the head. To ease its installation, the teflon seal ring may be folded into a "kidney" shape. The ring is durable and will return to its original shape without damage.3. Install the u-cup seal (3) in the head with the open end of the "u" facing the piston end of the head.4. Use sandpaper or emery cloth to "roughen" the surfaces of the counter bore in the cylinder head and the outside diameter of the double-lip wiper's metal shell (5).5. Clean the counter bore in the head and the outside diameter of the double-lip wiper with 8T9011 Cleaner or 6V1541 Quick Cure Primer until neither discolors a clean white towel. The metal shell of the double-lip wiper is coated with a corrosion inhibitor which may prevent proper bonding of the seal to the cylinder head if it is not removed. After cleaning, do not touch the counter bore or the metal shell because oil from your fingers may prevent a good bond. Handle the seal by the lips only.6. Apply 6V1541 Quick Cure Primer on the counter bore and the metal shell of the wiper and allow it to dry. It will dry in approximately 30 seconds.7. Apply 7M7456 Bearing Mount evenly but not excessively to both the counter bore and the metal shell of the double-lip wiper.8. Press the wiper into the counter bore until the metal shell is seated firmly against the bottom of the counter bore. Wipe away any excess bearing mount. Allow the bearing mount to dry for 15 minutes before assembling the cylinder.9. Lightly lubricate the seals and wear ring with clean hydraulic fluid before installing the head on the cylinder rod.

Caterpillar parts catalog:

Caterpillar parts catalog
3516 Generator Set ZAL00001-UP
3516B Generator Set ZAP00001-UP
3516B Generator Set ZAR00001-UP
3516 Generator Set YAL00001-UP
3516B Generator Set YAP00001-UP
3516B Generator Set YAR00001-UP


Parts support Caterpillar catalog:

2107661 SUPPORT GP-POWER MODULE
3508, 3508B, 3512, 3512B, 3516, 3516B
7N8651 SUPPORT AS
3512B, 3516, 3516B, 3516C, G3516, G3516B
6I3138 SUPPORT AS-COOLER
3508, 3508B, 3508C, 3512, 3512B, 3516, 3516B, PM3412
2W0318 SUPPORT AS
3512B, 3516, 3516B
1568572 SUPPORT
3508, 3508B, 3512, 3512B, 3516, 3516B, G3516, PM3508, PM3512, PM3516
2540027 SUPPORT
3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.