SUPPORT AS 2623963 - Caterpillar

Illustration 5 g00524931
Remove nut (9) from bladder (3) .
Illustration 6 g00524934
Remove locknut (10) from plug (12). Remove spacer (11) from plug (12) .
Illustration 7 g00524936
Push bladder (3) through plug (12) into accumulator (1) .
Push plug (12) into accumulator (1) .
Illustration 8 g00524935
Remove backup ring (13), O-ring seal (14) and washer (15) from accumulator (1) .
Illustration 9 g00524937
Reach into accumulator (1) in order to grab ring (16). Fold ring (16) in half in order to remove ring (16) from accumulator (1) .
Illustration 10 g00524938
Reach into accumulator (1) in order to grab plug (12). Remove plug (12) from accumulator (1) .
Illustration 11 g00524939
Reach into accumulator (1) in order to grab bladder (3). Pull bladder (3 ) out of accumulator (1) far enough in order to install nut (9). Use nut (9) as a handle in order to assist in removing bladder (3) from accumulator (1) .
Illustration 12 g00524941
Illustration 13 g00524940
Remove the plug (not shown) and the O-ring seal from plug (18). Remove locknut (17) and spacer (19) from plug (18) .
Push plug (18) into accumulator (1) .
Illustration 14 g00570098
Remove backup ring (20), O-ring seal (21) and washer (22) from accumulator (1) .
Illustration 15 g00525010
Reach into accumulator (1) in order to grab ring (23). Fold ring (23) in half in order to remove ring (23) from accumulator (1) .
Illustration 16 g00524942
Reach into accumulator (1) in order to grab plug (18). Remove plug (18) from accumulator (1) .
Illustration 17 g00524943
Illustration 18 g00524944
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove nut (24) from poppet (25). Remove poppet (25), spring (26), and piston (27) from plug (18) .