SUPPORT AS 2814444 - Caterpillar

Illustration 1 g00104735
Remove the four plugs which are located on the top of the cab. Secure four eyebolts into the threaded holes. The four eyebolts are located in the toolbox.
Illustration 2 g00104736
Electrical connector (1) and hose (2) for the window washer solvent are located behind the operator's seat.
Disconnect electrical connector (1) .
Disconnect hose (2) for the window washer solvent.
Illustration 3 g00104737
Cab platform
Remove the eight bolts which secure the cab to the cab platform.
Illustration 4 g00104738
The support assembly is repositioned for the removal of the cab. (3) Holes (4) Support assembly
Remove the two bolts from holes (3) which secure support assembly (4). This will allow the cab to be lifted upward without interference.
Illustration 5 g00104739
Typical example
Pull the windshield wipers away from the windshield. This will allow the cab to be lifted upward without interference.
Connect a chain to the eyebolts. Slowly lift up the cab off the cab platform.
Move support assembly (4) into the original position. Secure support assembly (4) with bolts through holes (3) .