SUPPORT-STEP 2838385 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-5575 Hydraulic Jack 1
B 439-3939 Link Bracket As 4 Start By:
Remove the power pack.
Drain the transmission oil in a suitable container for storage or disposal. Refer to the Operation and Maintenance Manual, "Transmission Oil - Change" for the correct draining and filling procedures.
Illustration 1 g02730468
Disconnect clip (1), hose assembly (2), and harness assemblies (3).
Illustration 2 g02730470
Disconnect tube assembly (4), hose assembly (5), and tube assembly (6).
Illustration 3 g02730473
Disconnect hose assembly (7).
Illustration 4 g02730474
Attach a suitable lifting device to power train oil tank (8). The weight of power train oil tank (8) is approximately 68 kg (150 lb). Remove bolts (9) and power train oil tank (8).
Illustration 5 g02730471
Disconnect hose assembly (10). Remove fitting (11).
Illustration 6 g02730472
Illustration 7 g02730475
Use Tooling (A) to support engine (12).
Attach Tooling (B) and a suitable lifting device to transmission, torque converter, and transfer gears (13). The weight of transmission, torque converter, and transfer gears (13) is approximately 660 kg (1455 lb).
Remove bolts (14) and bolts (15). Remove transmission, torque converter, and transfer gears (13).Installation Procedure
Install transmission, torque converter, and transfer gears (13) in the reverse order of removal.