2896805 SUPPORT AS-ENCLOSURE Caterpillar parts
320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L
Rating:
Alternative (cross code) number:
CA2896805
289-6805
2896805
CA2896805
289-6805
2896805
Weight: 17 pounds 7 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2896805:
Number on catalog scheme:
18
For full view, you need register
Information:
Table 1
Tools Needed
Part Number Part Description Qty
3J-1907 O-Ring Seal 2
177-7862 Hose Assembly 2
6V-3965 Nipple 2
6V-4143 Coupler Assembly 4
198-4240 Digital Pressure Indicator 1
Personal injury or death can result from machine movement.Place blocks in front of and behind the wheels to make sure the machine does not move while the parking brakes are disengaged.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine or release of air pressure or oil pressure can cause injury to persons on or near the machine.To help prevent possible injury before testing and adjusting any air system or hydraulic system, perform the procedure in the Testing and Adjusting, "General Information" section.
Place the transmission control into the PARK position. Placing the transmission in PARK will engage the parking brakes.
Illustration 1 g02422436
(1) LH pressure tap for the rear slack adjuster.
(2) RH pressure tap for the rear slack adjuster.
Install a 198-4240 Digital Pressure Indicator to pressure tap (1) on the LH rear slack adjuster.
Install a 198-4240 Digital Pressure Indicator to pressure tap (2) on the RH rear slack adjuster.
Illustration 2 g02422437
(3) Pressure tap for the front brakes.
Install a 198-4240 Digital Pressure Indicator to pressure tap (3).
Start the engine. Operate the engine at low idle.
Move the retarder control lever to the OFF position. Apply the service brake. The following pressures should be indicated:
Oil pressure at the rear slack adjusters should be 6065 690 kPa (880 100 psi).
Oil pressure at the front pressure tap should be 8140 700 kPa (1181 102 psi).
Release the service brake.
Move the retarder control lever to the maximum ON position. The following pressures should be indicated:
Oil pressure at the rear slack adjusters should be 5000 690 kPa (720 100 psi).
Oil pressure at the front pressure tap should be 0 kPa (0 psi).
Move the retarder control lever to the OFF position.
Stop the engine. Note: Perform the Hydraulic SystemSystems Operation/Testing and Adjusting, "Slack Adjuster - Test and Adjust" in order to determine the pressure at each wheel.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine or the release of oil under pressure can cause injury to persons on or near the machine. To prevent possible injury before testing and adjusting the hydraulic system, perform the procedure in the Testing and Adjusting, "General Information" section.
Note: Make sure that you remove all air from the hydraulic brake system. See the Testing and Adjusting, "Brake System Air - Purge" for the procedure.
Cat SIS web machinery list:
Parts support Caterpillar catalog:
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 305, 311, 311B, 311C, 312B, 312C, 312C ...
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 ...
3797426
SUPPORT AS
320D2, 320D2 GC, 320D2 L, 323D2 L
320D2, 320D2 GC, 320D2 L, 323D2 L
3979010
SUPPORT AS
320D2, 320D2 GC, 320D2 L, 323D2 L
320D2, 320D2 GC, 320D2 L, 323D2 L
4158976
SUPPORT AS
323D2 L
323D2 L
3773289
SUPPORT AS
320D2, 320D2 L, 323D2 L
320D2, 320D2 L, 323D2 L
3794666
SUPPORT AS
323D2 L
323D2 L
4197580
SUPPORT AS
320D2, 320D2 GC, 320D2 L
320D2, 320D2 GC, 320D2 L
3963542
SUPPORT AS
320D2, 320D2 GC, 320D2 L
320D2, 320D2 GC, 320D2 L
4310102
SUPPORT AS
320D2, 320D2 L
320D2, 320D2 L
3636870
SUPPORT AS
320D2
320D2
3963564
SUPPORT AS
320D2, 320D2 GC
320D2, 320D2 GC
2448255
SUPPORT AS
320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
2448251
SUPPORT AS
320D
320D
2448244
SUPPORT AS
320D
320D
2448242
SUPPORT AS
320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
2448239
SUPPORT AS
320D
320D
2448234
SUPPORT AS
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
3258865
SUPPORT AS
320D, 320D FM, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
320D, 320D FM, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
2661071
SUPPORT AS
320D, 320D FM, 320D L, 323D L
320D, 320D FM, 320D L, 323D L
2967067
SUPPORT AS
320D, 320D FM, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
320D, 320D FM, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
2967069
SUPPORT AS
320D, 320D FM, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
320D, 320D FM, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D LN, 323D2 L
2344591
SUPPORT AS
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
2737774
SUPPORT AS
320D, 320D L, 320D2, 320D2 L, 323D L, 323D LN, 323D2 L
320D, 320D L, 320D2, 320D2 L, 323D L, 323D LN, 323D2 L