SUPPORT 2990245 - Caterpillar

ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-5000 hrs,
0-72 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Before completing rework procedure. Proof of Engine reset must be provided for claim approval. This includes one of following: ET data Log capturing shutdown event or OEM?s Electronics On Board Information system (EBIS) showing loss of communications
2. Clean off all the debris in the area to be serviced.
3. Remove fuel line at location (5) and adapter at location (15). See Image1.1.1.
4. Install 360-3693 STO Plug and 3K-0360 O-ring at location (15).
5. Disconnect fuel line at location (3) back of head bulk head connector. See Image1.1.2.
6. Install 5P-2909 JIC Plug at location (3). See Image1.1.2.
7. Install 030-7942 Elbow and 214-7568 O-ring as shown in Image1.1.3.
8. Route and install bypass 350-1838 Fuel Line as shown in Image1.1.3.
9. Install 206-2423 Saddle Clips and 7K-1181 Straps at location shown in Image1.1.3.
Image1.1.1
Image1.1.2
Image1.1.3